Size Specification
Nominal |
Size (inch) |
Size (mm) |
Min |
Max. |
Min |
Max. |
2.5" x 2.5 |
2.470 |
2.500 |
62.74 |
63.50 |
3." x 3.° |
2.970 |
3.000 |
75.44 |
76.20 |
4." x 4.° |
3.970 |
4.000 |
100.84 |
101.60 |
5." x 5." |
4.970 |
5.000 |
12.26 |
127.00 |
6." x 6." |
5.970 |
6.000 |
151.64 |
152.40 |
Thickness Specification
Nominal |
Size (inch) |
Size (mm) |
Min |
Max. |
Min |
Max. |
0.060" |
0.056 |
0.064 |
1.42 |
1.62 |
0.090" |
0.086 |
0.094 |
2.18 |
2.39 |
0.120" |
0.116 |
0.124 |
2.95 |
3.15 |
Flatness Availability
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.5" x 2.5 |
|
|
|
|
|
|
|
|
|
3." x 3.° |
|
|
|
|
|
|
|
|
|
4." x 4.° |
|
|
|
|
|
|
|
|
|
5." x 5." |
|
|
|
|
|
|
|
|
|
6." x 6." |
|
|
|
|
|
|
|
|
|
Substrate Identification
|
Note : Corner notches are for substrate identification only and do not indicate a good versus a bad side.
|
Quality Area
The quality area is defined as an area 1/2" smaller than the actual dimension of the plate (1/4" in from the edges of both the front and back sides of the substrate).
Quality Grades Available
Quality |
Defect Densities |
High |
No pinholes at defect sizes > 1 ¥ìm with 90% probability |
Standard |
< 0.05 def/cm2 for defect suze > 1 ¥ìm |
Test |
< 0.1 def/cm2 for defect size > 2 ¥ìm |
* Limited availability
|